It’s big on small space productivity. Carrying up to 6,500 pounds. Lifting as high as 23 feet. Unloading ore pallets at once in confined aisles. Clean, quiet AC power reduces emission worries, making the Core Electric a top choice for sensitive food and beverage applications, plus many other inside jobs. When the going gets tight, it gets going.

The Toyota Core Electric Forklift is an ideal four-wheel electric lift truck solution for most indoor and warehouse applications. With a compact model available, the Core Electric Forklift can move most any standard load while maintaining the ability to fully operate in spaces as small as 11 feet wide.

  • 3,000 – 6,500 lb. capacity
  • AC drive motor (38- to 48-volt)
  • No tools required floorboard
  • On-demand power steering
  • System of Active Stability (SAS), unique to Toyota forklifts, helps prevent tip overs
  • Active mast control (AMC) responds automatically to enhance the stability of loads handled at high lift heights
  • Forward tilt angle control and rear tilt speed control act automatically in uncertain situations to protect operator, and reduce product and forklift damage
  • One-way automatic fork leveling levels forks parallel to protect operator, and reduce product and forklift damage
  • Regenerative breaking improves overall efficiency and prolongs brake component life
  • Programmable performance parameters are customizable via digital display to fit a variety of job applications and operator skill levels
  • Dual operator assist grips and low, wide step for easy forklift entrance and exit from both sides
  • Standard 4-way adjustable full-suspension seat is wider with no hip restraints for easier entry/exit than competitors’ seats; weight adjustable for greater operator comfort
  • Spacious operator compartment with cup holder, utility tray and expansive legroom for increased comfort
  • On-demand power steering for smooth, responsive operation while isolating vibration and shock
  • Durability by design including tilt cylinder protection boots, stamped steel engine hood, fully sealed air intake, plate-iron front fenders and moisture-resistant electrical connections
  • Welded, roll-formed overhead guard pillars provide maximum operator protection with excellent entry/exit and load visibility

Specifications

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
7FBCU153,0009 (36V), 10.9 (48V)61 (36V), 85 (48V)20 (36V), 21 (48V)82.1
7FBCU183,500 8.7 (36V), 10.6 (48V)61 (36V), 81 (48V)18 (36V), 20 (48V)82.1
8FBCU204,0009.9 (36V), 11.5 (48V)67 (36V), 89 (48V)25 (36V), 23 (48V)87.2
8FBCU20-COMP4,000 9.9 (36V), 11.5 (48V)67 (36V), 89 (48V)21 (36V), 24 (48V)93.1
8FBCHU255,0009.6 (36V), 11.5 (48V)59 *36V), 79 (48V)21 (36V), 24 (48V)93.1
8FBCU255,0009.6 (36V), 11.5 (48V)59 (36V), 79 (48V)21 (36V), 19 (48V)87.6
8FBCU25-COMP5,0009.6 (36V), 11.5 (48V)59 (36V), 79 (48V)59 (36V), 79 (48V)85.6
8FBCU285,5009.3 (36V), 11.5 (48V)55 (36V), 73 (48V)17 (36V), 20 (48V)90.3
8FBCU306,0009.0 (36V), 11.2 (48V)51 (36V), 69 (48V)17 (36V), 20 (48V)94.9
8FBCU326,5009.0 (36V), 11.2 (48V)47 (36V), 65 (48V)47 (36V), 65 (48V)96.4

* Based on 24″ Load center
** Add load length and clearance

Details of specifications and equipment may change without notice.

Performance

  • AC drive system (MOSFET transistor)
  • AC hydraulic system (MOSFET transistor)
  • UL-approved model type “E”
  • Three forms of energy regeneration
  • Digital (LCD) multifunction display
  • Adjustable front headlights
  • Punched plate entry/exit step

Ergonomics / Operability

  • Strategically configured instrument display
  • Hydrostatic (on-demand) power steering
  • Dual operator assist grips
  • 11.8″ diameter two-spoke steering wheel
  • Cowl-mounted hydraulic controls
  • Heavy-duty non-slip floor mat
  • Electric directional shift control

Safety

  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Foot activated parking break
  • Manual return to neutral

Ease of Service

  • AC drive motor (no brushes or commutator)
  • Easy access hydraulic motor
  • Easy access no-tools floorboard
  • Battery compartment hood assist
  • Planned maintenance indicator
  • Easy access controllers

Optional Equipment

  • T-Matics Vehicle Management System
  • Compact model
  • Cold storage Model
  • EZ pedal
  • Integral sideshifter
  • Mini-levers with Ergoshift
  • Synchronized steering
  • Battery compartment side panels
  • Smooth, non-marking tires

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
7FBCU153,0009 (36V), 10.9 (48V)61 (36V), 85 (48V)20 (36V), 21 (48V)82.1
7FBCU183,500 8.7 (36V), 10.6 (48V)61 (36V), 81 (48V)18 (36V), 20 (48V)82.1
8FBCU204,0009.9 (36V), 11.5 (48V)67 (36V), 89 (48V)25 (36V), 23 (48V)87.2
8FBCU20-COMP4,000 9.9 (36V), 11.5 (48V)67 (36V), 89 (48V)21 (36V), 24 (48V)93.1
8FBCHU255,0009.6 (36V), 11.5 (48V)59 *36V), 79 (48V)21 (36V), 24 (48V)93.1
8FBCU255,0009.6 (36V), 11.5 (48V)59 (36V), 79 (48V)21 (36V), 19 (48V)87.6
8FBCU25-COMP5,0009.6 (36V), 11.5 (48V)59 (36V), 79 (48V)59 (36V), 79 (48V)85.6
8FBCU285,5009.3 (36V), 11.5 (48V)55 (36V), 73 (48V)17 (36V), 20 (48V)90.3
8FBCU306,0009.0 (36V), 11.2 (48V)51 (36V), 69 (48V)17 (36V), 20 (48V)94.9
8FBCU326,5009.0 (36V), 11.2 (48V)47 (36V), 65 (48V)47 (36V), 65 (48V)96.4

* Based on 24″ Load center
** Add load length and clearance

Details of specifications and equipment may change without notice.

  • AC drive system (MOSFET transistor)
  • AC hydraulic system (MOSFET transistor)
  • UL-approved model type “E”
  • Three forms of energy regeneration
  • Digital (LCD) multifunction display
  • Adjustable front headlights
  • Punched plate entry/exit step
  • Strategically configured instrument display
  • Hydrostatic (on-demand) power steering
  • Dual operator assist grips
  • 11.8″ diameter two-spoke steering wheel
  • Cowl-mounted hydraulic controls
  • Heavy-duty non-slip floor mat
  • Electric directional shift control
  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Foot activated parking break
  • Manual return to neutral
  • AC drive motor (no brushes or commutator)
  • Easy access hydraulic motor
  • Easy access no-tools floorboard
  • Battery compartment hood assist
  • Planned maintenance indicator
  • Easy access controllers
  • T-Matics Vehicle Management System
  • Compact model
  • Cold storage Model
  • EZ pedal
  • Integral sideshifter
  • Mini-levers with Ergoshift
  • Synchronized steering
  • Battery compartment side panels
  • Smooth, non-marking tires

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

Download the Core Electric Brochure

Efficient, environmentally-friendly and mid-level capacity, the Toyota Core Electric forklift is the “just right” solution for most warehouses. Download a brochure to learn more about this warehouse workhorse.